The processing shed is assembled from a single finished product and is used for building elevator passages. It is fully enclosed and has high safety and protection performance. The hard steel structure plate with double-layer protection can effectively cushion the impact of falling from height, set up a three-side protective net to isolate workers from the side of the elevator dangerous, with the National Standard Steel Production Firm and durable;

Double smash-proof structure, standardized design, full combination, quick assembly, easy disassembly and transportation;

The processing shed is in the construction site to carry on the straight, the bending, the welding and so on reinforcement processing place. The length and width of the universal woodworking shed will be determined according to the number of rebars processed and the number of machines used to determine the size of the shed, usually 6 * 12m, 9 * 12m, 18 * 30m, and so on, as required.

Engineering practice, self-designed length and width dimensions. The layout of the worktable of the woodworking shed should also be reasonable. According to the actual reinforcement processing flow, there are also pre-processing raw reinforcement and finished products stored after processing. Therefore, the ground should be over 30 cm above the construction site to prevent the rain from soaking, when placing hand tubes with feet, cross bar and diagonal bracing shall be used to ensure the stability of the processing shed.